Trucks

Truck Earthing System

COBRA TES

Applications

Loading and unloading non-conducting liquids or powders from trucks can generate electostatic charges. If enough electrostatic energy is generated, there will be an explosion hazard.
This risk can be avoided by earthing the truck via a COBRA TES earthing verification system.

The COBRA TES earthing system consists of a control unit, a connecting spiral cable or cable reel and a stainless steel connection clamp. All components are ATEX certified.

Certifications

–

Additional information

Control Unit

Control Unit provides five important functions :

  • Initial earthing over high resistance (no spark formation)
  • Truck detection (capacitive measurement)
  • Verification of the connection from truck to earth via the clamp
  • Status indication LEDs
  • Potential-free contact for loading and unloading release.

Spiral cable or cable reel

To connect the trailer to the earth, choose from a spiral cable (3, 5 or 10 m) or a cable reel (15 m) with automatic retractor.

Earthing Clamp

The active earth clamp is spring-loaded and equipped with hardened, sharp teeth. When the clamp is attached to the object, the teeth penetrate paint, rust, or dirt, ensuring a low-resistance electrical connection (less than 10 Ohm).
Once the clamp is properly applied, the circuit between the jaws is closed and the system verifies the electrical continuity between the clamp, the connected equipment, and the control unit, ensuring proper grounding during the operation.

The STUVEX COBRA TES earthing system has been designed for industrial use and is rugged and compact.
It’s made of durable and robust materials to withstand difficult industrial environments.

  • Safe electrostatic discharge of the truck
  • Truck detection via capacitive measurement
  • Low resistance (adjustable to < 10Ω or <30Ω) between truck and TES
  • Clearly visible red and green LEDs
  • Potential-free contact to enable loading and unloading operations
  • Power supply : 110-240 V AC or 24 DC (standard)
    Easy ‘plug and play’ installation
  • Truck detection ON/OFF, integrated for TES IP
  • Stainless steel housing for TES IP version
  • ATEX and IECEx certified
  • Complies with IEC/TS60079-32-1 and NFPA 77
  • Designed for SIL 2 applications

Technical information

Downloads

COBRA Catalog

COBRA TRUCK EARTHING VERIFICATION E-TES01-V2 (IP)(EX) | General data sheet

Would you like more information about this product?

"*" indicates required fields

Address*
*